FLOW RATE INFO

See 5 YouTube Video's of Key Website Points

FLOWMETER FLOW RATE LIMITER AND LOCK

FOR MIG AND TIG WELDING

This page will help navigate the web site which has a great deal of information about MIG gas waste and how our patented Flow Rate Limiter and Lock (FRLL) solves shielding gas waste and improves weld quality.

	See one of the causes for MIG gas usage being over 3 times what should be used.
	See what the Manager of Welding R&D for the leading shielding gas producer, Praxair says about using over 50 CFH gas flow. It creates defects.

	See a summary of our patented Flow Rate Limiter and Lock (FRLL.)
	See how the FRLL can set the maximum flow rates and either lock a preset flow value or allow only a reduction from a maximum set value.
	See Testimonial from a Texas Company who saved 35% of their shielding gas used with our FRLL

	Purchase Flow Rate Limiter	Purchase Gas Saving Products
	Purchase Training Products	Purchase Wire Feeding Aids
		Purchase Replaceable Orifice Flow Control System

Save over $1000 per year per welder and improve weld starts with Payback measured in weeks!!

* US Patent # 6,610,957; "Welding Shielding Gas Saver Device" August 26, 2003, Patent Pending in other countries. The "Flow Rate Limiter" device is

covered by 2008 US patent #7,462,709. Other site material may be covered under our 2006 US Patents # 7,015,412 or # 7,019,248 .

Questions? Send E-mail TechSupport@NetWelding.com
Last modified: 02/03/10

Save over $1000 per year per welder and improve weld starts with Payback measured in weeks!!

* US Patent # 6,610,957; "Welding Shielding Gas Saver Device" August 26, 2003, Patent Pending in other countries. The "Flow Rate Limiter" device is

covered by 2008 US patent #7,462,709. Other site material may be covered under our 2006 US Patents # 7,015,412 or # 7,019,248 .

Questions? Send E-mail TechSupport@NetWelding.com Last modified: 02/03/10

Questions? Send E-mail TechSupport@NetWelding.com
Last modified: 02/03/10